You are messing around with custom Roms, tweaking your Gionee M2 and doing some other mind blowing stuffs on your M2 right?
So you just bricked your Gionee M2,then you are at the right place and you’re reading the right article.
There are some many reasons that can cause your phone to brick and bricking also has two categories they include :
1 Soft Brick
and
2 Hard Brick
If you soft bricked your phone then you’re safe.
If you hard bricked your phone their are two things involved,is either you take it to the service center or buy a new phone.
Am writing this post on Ayoproxy.com for those who have soft bricked their Gionee M2.
HOW TO UN-BRICK YOUR GIONEE M2
You will need the following ;
Your head (Brain)
CWM recovery installed on your phone before.
An SD card
And Stock ROM……
I hope you can still boot to recovery?
If yes…
Download the stock ROM for Gionee m2 HERE
Copy to your SD card
Boot to your recovery and install the downloaded stock ROM like you re installing a custom ROM.
FLASHING INSTRUCTIONS
Boot to recovery
Wipe Data Preflash
If you don’t ve data preflash for those using CWM recovery, just wipe data,cache,dalvik cache
Goto install zip from SD card
Locate the Stock ROM and flash
It will take like 5mins or more to boot up,
Be patient…..
I can’t boot to recovery.
This is a bad news that means you have to follow a advance tutorial with the help of SP FlashTool. But am yet to write the tutorial. 😨
NOTE : THIS TUTORIAL WORKS FOR EVERY OTHER ANDROID DEVICES BUT YOU SHOULD NOT USE THE FILE UPLOADED HERE FOR ANY OTHER DEVICE EXCEPT GIONEE M2.
I love to read comments they encourage me.
CREDITS :
AarinZee
